Información del proyecto
Descripción
Evaporador de agua SALMA modelo EVAP (youtube.com)
The EVAP model is capable of pumping different types of flow rates as needed with a high degree of evaporation efficiency, as it generates a fine cloud of water with very fine particles that evaporate very easily.
The equipment has a filter to block solid particles. It is an external filter that is easy to clean manually and does not require stopping the evaporation process. Practice indicates that in this type of processes, solids can be absorbed from the bottom of the ponds that subsequently end up blocking the equipment nozzles, which is why the use of an easy-to-clean filter system improves performance considerably.
A submersible pump is supplied that will be located inside the liquid basin and that will be fixed to a flotation element to prevent the pump from touching the bottom of the basin, thereby avoiding the absorption of solid particles as much as possible. that are deposited in its fund. The pump will be connected to the EVAP using a flexible hose.
The equipment will be supplied on a resistant galvanized chassis that is prepared for easy transportation using a forklift or existing machinery on site. The chassis can also be coated with special treatments in cases of very acidic and/or corrosive water.
Among the different applications of the EVAP model, the following stand out:
Leaching water in landfills
Process waters generated by mining and extractive activity
Water from chemical processes
Water extracted from oil fields
Leaching water in environmental recycling centers
Any project that requires the evaporation of large flow rates of a fluid through direct contact with air
The equipment is designed according to the client’s requirements and appropriate to the characteristics of each project.
The proposed solution depends on the starting data:
Daily cubic meters of water to be pumped.
The duration of the operation (hours of operation/day).
Water quality (ph)
Solids content of water
Water temperature
Temperature and humidity of the place
The characteristics of the selected equipment will also depend:
The particle size of water (normally it will be the smallest possible).
The distance to which the fluid can be projected so as not to interfere with the environment or adjust to the dimensions of the pond or dam.
Need to have fixed or mobile equipment.
Limitations regarding noise for closed spaces (decibels).
The installation of electrical power to the machines is at the client’s expense.
If there is no water or electricity supply, the equipment can be built in its autonomous version equipped with a generator and fuel tank mounted on a wheeled chassis.
Under normal circumstances, installations with EVAP cannons are usually located around the ponds or ponds that are intended to be dried, so the excess water that does not evaporate returns to the pond itself.
However, there are cases where the water comes from the subsoil and it is intended that puddles are not generated on the surface, which requires having a greater number of cannons, in order to avoid the accumulation in the same point of water that does not evaporate, since Thus, less water flow passes through each canyon and it can be distributed throughout a larger area of land.
